A Complete Range Of Metal Cleaning
And Surface Treatment Solutions

Telephone: +44 (0) 20 8281 6370
  • EnSolv Vapour Degreasing
  • Metal Cleaning And Surface Treatment
  • CORR-EX Corrosion Protection
  • ProSolv Critical Cleaning Solvent
  • Clarea Degreasing Solvents
  • Aquus Metal Pretreatment
EnSolv1 DriPHOS2 CORR-EX3 ProSolv4 Clarea5 Aquus6

The Best In Metal Cleaning And Surface Treatment

EnviroTech Surface Technologies provide a range of approved metal cleaning and surface treatment solutions which are cost effective and energy efficient.

We have the complete answer for the cleaning and preparation of metal, plastic and composite surfaces ready for finishing by electro plating, painting and powder coating.
Our processes are safe for operators and for the environment.

EnviroTech Europe Ltd (ETE) is an established and reputable UK based company with expert distributors throughout Europe. Read more about EnviroTech Europe.

Request Informaton

Vapour Degreasing Solvents For Precision Metal Cleaning

Which products are you interested in?:
EnSolv DriPHOS
Clarea Aquus
Request MSDS?
Existing Customer?
Vapour Degreasing

Environmentally friendly precision vapour degreasing and cleaning solvents for the aerospace, precision engineering, medical, optical and electronic industries.

EnSolv® vapour degreasing solvents are the most effective alternative to trichloroethylene which is due to be phased out of use in Europe during 2016. Fast, economical cleaning and degreasing in one tank using minimal floor area.

Our n-propyl bromide degreasing solvents are specifically formulated to address the difficult precision cleaning problems experienced in high-tech industries where exceptional levels of cleanliness are needed. Read more about Ensolv Vapour Degreasing Solvents.

Metal Cleaning And Surface Treatment In One Tank

Metal Treatment

A revolutionary process using stable solvents to dissolve and carry the active chemicals using precursors to produce a protective crystalline primer on the metal surface.

DriPHOS® TLT is a proprietary metal treatment process using unique Thin Layer Technology to produce a simple to use solvent based process for metal priming and surface treatment. Clean, prime and dry metal in one tank.

DriPHOS® primer coatings form a nano thickness crystalline complex  part of the metal surface. Read more about DriPHOS Metal Cleaniing And Surface Treatment.

Corrosion Protection Solutions

Quality Management

EnviroTech Europe is accredited to
ISO 9001:2008 for marketing and distribution of specialist metal cleaning and corrosion protection products

ENVIRO Tech Europe is accredited to ISO 9001:2008

Corrosion Protection

Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

CORR-EX® solutions help to lubricate and control corrosion, and are unexcelled in preventing deterioration and contamination. Solutions for derusting, passivation, sealing and anti-corrosion packaging are also included in our product range.

Our corrosion protection sprays and corrosion protective packaging products are based on synthetic materials, safe to use and unexcelled in preventing deterioration and contamination. Read more about CORR-EX Corrosion Protection Solutions.

EnviroTech Latest News

High Performance Critical Cleaning Solvent

Critical Cleaning

Are you still using Trike for Vapour Degreasing? Trichloroethylene will not be obtainable for metal cleaning or other uses without authorisation after April 2016.

ProSolv® enables high performance cleaning at a lower cost than other fluorinated solvent cleaners. A proprietary tertiary azeotropic formulation based on a fluorinated solvent which provides a direct replacement for trichloroethylene and other chlorinated solvents.

ProSolv® is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with a low environmental impact in the precision engineering industries. Read more about ProSolv Critical Cleaning Solvent.

Industrial Degreasing Solvents

Solvent Cleaners

Non chlorinated, industrial wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants without causing harm or leaving residue.

Clarea® flammable and non-flammable degreasing solvents are used as parts washers in manufacturing and automotive industries or are used as wipe cleaners for large surface areas prior to painting or powder coating.

A growing concern regarding environmental and health hazards of the most commonly used chlorinated solvents as industrial degreasing agents has led to the formulation of our range of safer cleaning solvents. Read more about Clarea Degreasing Solvent Cleaners.

Water Based Metal Cleaning And Pretreatment Processes

Metal Pretreatment

Innovative and sustainable water based metal cleaning and surface treatments which prepare parts and fabrications for painting, powder coating or electroplating.

Aquus® processes include phosphate, zirconium / titanium treatments and alkaline cleaners, and are available to meet the needs of all manufacturers from office furniture to household appliances and other more demanding applications in transport, aerospace, construction, oil and marine industries.

Cleaning to the highest standards is achieved with solutions which are safe for operators, environment friendly, energy efficient and which when exhausted can usually be pumped to mains sewerage without expensive treatments or disposal costs. Read more about Aquus Metal Pretreatment Processes.

Social Feed

EnviroTech Surface Technologies
A Complete Range Of Metal Cleaning And Surface Treatment Solutions

EnviroTech Europe Ltd
100a High Street
United Kingdom TW12 2ST

Company registered in UK No 4170693
VAT No GB765 682 977
© Copyright 2014 ALL RIGHTS RESERVED

Follow EnviroTech:



Telephone: +44 (0) 20 8281 6370
Website: www.envirotech-europe.com