Metal Cleaning And Surface
Treatment In One Tank
Innovative technology for metal pretreatment,
cleaning and priming.
Metal Pretreatment
Metal Cleaning And Surface
Treatment In One Tank
Arrange a visit to our Product Testing Centre
Metal Pretreatment
Arrow
Arrow
Arrow
Arrow
ArrowArrow
DriPHOS
Metal Cleaning And Surface Treatment In One Tank
Product Testing
Vist our Product Testing Centre
Slider

DriPHOS Metal Cleaning

Metal Pretreatment, Cleaning And Priming In One Tank

The DriPHOS® TLT (Thin Layer Technology) Metal Pretreatment Process uses stable solvents as the media to dissolve and carry the active chemicals using precursors to produce a protective crystalline primer on the metal surface.

DriPHOS Cystaline StructureThe very large increase in surface area is due to the unique “fish scale” structure of overlapping crystals growing from and forming an integral part of the metal surface.

This produces more keying area for priming the metal for subsequent paint, powder and other finishes to improve the adhesion.

These coatings are then more resistant to impact damage or scratches.

DriPHOS® primer coatings form a nano thickness crystalline complex  part of the metal surface. This flexes with the metal preventing delamination of finishes which greatly increases corrosion protection compared to the random amorphous coating of conventional aqueous coatings.

For more detailed information please visit the DriPHOS® product website.

DriPHOS Equipment

Revolutionise your metal pretreatment, cleaning and finishing

Read more about DriPHOS Equipment.

DriPHOS Benefits

EFFICIENT AND ECONOMICAL

  • Highly productive and economical in use
  • Replaces multistage aqueous processes with one tank
  • Very short process time between 5 to 10 minutes per basket of components
  • Frees up floor space for more production
  • 40°C operating temperature means very low energy costs
  • Fast economical production using the minimum space
  • Simple, sophisticated technology reduces your costs while improving quality

RELIABLE

  • Components are instantly ready for use, for fabrication, assembly or finishing where small batches of different colours are needed
  • Stored parts do not rust or corrode for long periods in dry conditions allowing larger, more efficient, economical batches of parts to be produced
  • Excellent customer service, technical support and training from qualified distributors throughout Europe
DriPHOS Equipment

Thin Layer Technology

Read more about Thin Layer Technology used in the DripHOS process.

DriPHOS Revolutionises Metal Cleaning

DriPHOS revolutionises metal cleaning, pre-treatment and finishing of 'point of sale' displays - in one tank. 'Point-of-sale' display systems are modular in design. Greetings cards, pop and film star poster producers, cosmetics, confectionery displays for retail...

read more

DriPHOS Metal Cleaning

Metal Pretreatment, Cleaning And Priming In One Tank

The DriPHOS® TLT (Thin Layer Technology) Metal Pretreatment Process uses stable solvents as the media to dissolve and carry the active chemicals using precursors to produce a protective crystalline primer on the metal surface.

DriPHOS Cystaline StructureThe very large increase in surface area is due to the unique “fish scale” structure of overlapping crystals growing from and forming an integral part of the metal surface.

This produces more keying area for priming the metal for subsequent paint, powder and other finishes to improve the adhesion.

These coatings are then more resistant to impact damage or scratches.

DriPHOS® primer coatings form a nano thickness crystalline complex  part of the metal surface. This flexes with the metal preventing delamination of finishes which greatly increases corrosion protection compared to the random amorphous coating of conventional aqueous coatings.

For more detailed information please visit the DriPHOS® product website.

Videos

DriPHOS Equipment

Thin Layer Technology

Read more about Thin Layer Technology used in the DripHOS process.

DriPHOS Equipment

Revolutionise your metal pretreatment, cleaning and finishing in one tank

Read more about DriPHOS Equipment.

DriPHOS Benefits

EFFICIENT AND ECONOMICAL

  • Highly productive and economical in use
  • Replaces multistage aqueous processes with one tank
  • Very short process time between 5 to 10 minutes per basket of components
  • Frees up floor space for more production
  • 40°C operating temperature means very low energy costs
  • Fast economical production using the minimum space
  • Simple, sophisticated technology reduces your costs while improving quality

RELIABLE

  • Components are instantly ready for use, for fabrication, assembly or finishing where small batches of different colours are needed
  • Stored parts do not rust or corrode for long periods in dry conditions allowing larger, more efficient, economical batches of parts to be produced
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

DriPHOS Benefits

EFFICIENT AND ECONOMICAL

  • Highly productive and economical in use
  • Replaces multistage aqueous processes with one tank
  • Very short process time between 5 to 10 minutes per basket of components
  • Frees up floor space for more production
  • 40°C operating temperature means very low energy costs
  • Fast economical production using the minimum space
  • Simple, sophisticated technology reduces your costs while improving quality

RELIABLE

  • Components are instantly ready for use, for fabrication, assembly or finishing where small batches of different colours are needed
  • Stored parts do not rust or corrode for long periods in dry conditions allowing larger, more efficient, economical batches of parts to be produced
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

DriPHOS Metal Cleaning

Metal Pretreatment, Cleaning And Priming In One Tank

The DriPHOS® TLT (Thin Layer Technology) Metal Pretreatment Process uses stable solvents as the media to dissolve and carry the active chemicals using precursors to produce a protective crystalline primer on the metal surface.

DriPHOS Cystaline StructureThe very large increase in surface area is due to the unique “fish scale” structure of overlapping crystals growing from and forming an integral part of the metal surface.

This produces more keying area for priming the metal for subsequent paint, powder and other finishes to improve the adhesion.

These coatings are then more resistant to impact damage or scratches.

DriPHOS® primer coatings form a nano thickness crystalline complex  part of the metal surface. This flexes with the metal preventing delamination of finishes which greatly increases corrosion protection compared to the random amorphous coating of conventional aqueous coatings.

For more detailed information please visit the DriPHOS® product website.

Videos

DriPHOS Equipment

Thin Layer Technology

Read more about Thin Layer Technology used in the DripHOS process.

DriPHOS Benefits

EFFICIENT AND ECONOMICAL

  • Highly productive and economical in use
  • Replaces multistage aqueous processes with one tank
  • Very short process time between 5 to 10 minutes per basket of components
  • Frees up floor space for more production
  • 40°C operating temperature means very low energy costs
  • Fast economical production using the minimum space
  • Simple, sophisticated technology reduces your costs while improving quality

RELIABLE

  • Components are instantly ready for use, for fabrication, assembly or finishing where small batches of different colours are needed
  • Stored parts do not rust or corrode for long periods in dry conditions allowing larger, more efficient, economical batches of parts to be produced
  • Excellent customer service, technical support and training from qualified distributors throughout Europe

EnviroTech Surface Technologies

A Complete Range Of Metal Cleaning And Surface Treatment Solutions

EnviroTech Europe Ltd

100a High Street
Hampton
Middlesex
United Kingdom
TW12 2ST

Telephone: +44 (0) 20 8281 6370
Website: www.envirotech-europe.com

NATO Cage Code: U0H05
Company registered in UK No 4170693
VAT No GB765 682 977

WEBSITE INFORMATION

Share
Share
Tweet
+1
Email