Telephone: +44 (0) 20 8281 6370

Telephone: +44 (0) 20 8281 6370

EnviroTech Europe
EnviroTech Europe
Metal cleaning and surface treatment solutions
ProSolv 5408e
ProSolv 5408e
Environmentally sustainable vapour degreasing solvent
SuperCORR A
SuperCORR A
Advanced corrosion protection compound
EnSolv CC-A
EnSolv CC-A
Vapour degreasing solvent for precision metal cleaning
Aquus
Aquus
Water based, general purpose industrial cleaning agent
Clarea
Clarea
Non-chlorinated industrial degreasing solvents
ProSolv
ProSolv
High performance vapour degreasing solvent
previous arrow
next arrow
EnviroTech Europe
Vapour Degreasing Solvents

A complete range of metal cleaning and surface treatment products

High performance, cost effective and energy efficient - Safe for operators and the environment

ProSolv 5408e
ProSolv5408e

Environmentally sustainable high performance vapour degreasing solvent

Zero ozone depletion (ODP) and global warming potential (GWP)

SuperCORR A
ProSolv5408e

Advanced lubricant and corrosion protection compound

Formulated without sulphates, chlorides or other halogens

EnSolv CC-A
ProSolv5408e

Vapour degreasing solvent for precision metal cleaning

Removes oil, grease and soils fast

Aquus
Aquus-CL-One

General purpose industrial cleaning agent

A non-toxic, water based surfactant system which exhibits a combination of characteristics not found in any comparable commercially available system.
FREE SAMPLE AVAILABLE

Clarea
ProSolv5408e

Non-chlorinated Industrial degreasing solvents

Remove dirt, oil, grease, or other contaminants from surfaces without causing harm or leaving residue

ProSolv
ProSolv5408e

High performance vapour degreasing solvent

Simple “drop-in” replacement for n-Propyl Bromide and Trichloroethylene

The best solutions for vapour degreasing, corrosion protection, metal cleaning and surface treatment

EnviroTech Europe has the complete answer for the cleaning and preparation of metal, plastic, and composite surfaces – ready for finishing by electroplating, painting and powder coating.

We can offer a range of approved products tailored to your industry, which are cost effective, energy efficient, safe for operators and the environment. Expert technical support and training is provided throughout Europe.

We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance. For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.

All products are supplied and supported by EnviroTech Europe Ltd.  Manufactured in the United Kingdom and available on short delivery times through our dedicated team of qualified distributors in Europe and the Middle East.

free trial sample of Aquus CL-one

  • We are looking for companies who would be willing to put one of our latest products to the test.  All we ask in return is you share the results with us, with no obligation to purchase after. Although we think you will find out the advantages of Aquus CL-One for yourself.
  • We are looking for people in :
    Maritime: General vessel cleaning, Bilge cleaning
    Bulk Storage tanks: Cleaning and removal of oils / sludge
    Railway: Bulk storage containers, Train and carriage washing
    Automotive: Parts washing
    Precision Engineering: Parts washing
    Printing Industry: General machine cleaning
    Laundry: Industrial laundry

Share this page:

Introduction Video

corrosion protection for aircraft

EnviroTech Europe has been supplying metal cleaning and surface treatment products for over 30 years​ and we continue to innovate new ideas with technology and legislation.

Latest Article: Super CORR A Protects mechanical and electrical flight controls in surveillance aircraftread more.

replace n-Propyl Bromide

The deadline for solvents needing authorisation was July 2020

Are you still using 1-Bromopropane (n-propylbromide or nPB) for Vapour Degreasing?  nPB needed authorisation for use from  July 2020. Click here for nPB replacement.

Are you still using trichloroethylene (Trike) for Vapour Degreasing? Trichloroethylene needed authorisation for use from April 2016. Click here for trichloroethylene replacement.

Quality Management

ISO-9001-2015

EnviroTech Europe is accredited to ISO 9001:2015 for marketing and distribution of specialist metal cleaning and corrosion protection products. View certificate.  View list of companies who have approved our products.

SuperCORR A -Advanced corrosion protection for aircraft

Advanced corrosion protection for aircraft - SuperCORR A lubricates and protects mechanical and electrical flight controls in surveillance aircraft.Super CORR A provides advanced corrosion protection for aircraft - It lubricates and protects mechanical and electrical flight controls and electronic equipment in Lockheed Martin P-3C Orion aircraft flown by...

read more

Aquus CL-One general purpose industrial cleaning agent

Aquus® CL-One concentrated general purpose industrial cleaning agent -Non-toxic, water based cleaning and protection of metal surfaces - formulated to offer one solution for all cleaning applications in manufacturing, engineering and general maintenance.Aquus CL-One is a non-toxic general purpose cleaning agent based on a mixture of surfactants and...

read more

Social News Feed

Advanced corrosion protection for aircraft – SuperCORR A lubricates and protects mechanical and electrical flight controls in surveillance aircraft. ... See MoreSee Less

Load more

Product Range

ProSolv5408e

Environmentally sustainable
high performance vapour degreasing solvent

Zero ozone depletion (ODP) and global warming potential (GWP). Sustainable and secure for future use as your forever solvent.

ProSolv®5408e is a new solvent blend from EnviroTech Europe which ticks all the boxes with the perfect profile for a vapour degreasing solvent. Soft on the environment and safer for users. High performance, improved cleaning, lower costs.

Lower boiling point, economical with energy with low solvent losses, faster production, reduced costs, easy handling. Exceptionally low surface tension to penetrate micron sized holes and close contact surfaces.  ProSolv®5408e is the perfect replacement for hazardous solvents such as trichloroethylene, nPB (n-propyl bromide), perchloroethylene or flammable solvents used in general engineering cleaning processes. Read more,

Super CORR A

Advanced lubricant and corrosion protection compound

Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

SuperCORR A is a proprietary formulation containing extremely long lasting anticorrosion inhibitors, which also give superior lubrication coefficients and protects components against moisture. This unique, water displacing lubricant, with synthetic corrosion prevention compounds is tested and proven non-flammable and environmentally friendly. Read more.

Vapour degreasing solvent for
precision metal cleaning

The new drop in replacement formulation from EnviroTech builds on 30 years of experience supplying the EnSolv® range of powerful and reliable vapour degreasing solvents to industries worldwide.  

The EnSolv CC-A® formulation responds to the need for high performance vapour degreasing  solvents for critical cleaning in general engineering, aerospace, medical optical and electrical industries.

EnSolv CC-A® contains a proprietary blend of inhibitors and stabilisers for the solvents to prevent water staining and corrosion of yellow metals such as copper, brass and bronze which can be a problem with some other solvents. Read more.

Solvent Cleaners

Non-chlorinated Industrial
solvent cleaners

Non chlorinated, industrial wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants without causing harm or leaving residue.

Clarea® flammable and non-flammable degreasing solvents are used as parts washers in manufacturing and automotive industries or are used as wipe cleaners for large surface areas prior to painting or powder coating.

A growing concern regarding environmental and health hazards of the most commonly used chlorinated solvents as industrial degreasing agents has led to the formulation of our range of safer cleaning solvents. Read more.

Metal Pretreatment

General purpose industrial
cleaning agent

A non-toxic, water based surfactant system which exhibits a combination of characteristics not found in any comparable commercially available system.

Aquus CL-One is biodegradable, non-flammable, non-toxic at used concentrations and, unlike almost all other surfactant systems, is both hydrophilic (water attracting) and oleophobic (oil-repelling).

Aquus CL-One offers excellent emulsion-breaking capability in addition to its unusual combination of properties that makes it so attractive for such a broad range of industrial applications. Read more.

Critical Cleaning

High performance vapour
degreasing solvent

Are you still using Trike or nPB for Vapour Degreasing?

Trichloroethylene has not been obtainable for metal cleaning without authorisation since April 2016 . N-Propylbromide will require ‘authorisation’ for use in vapour degreasing and metal cleaning from July 2020.

ProSolv® enables high performance cleaning at a lower cost than other solvent cleaners. A vapour degreasing solvent based on a proprietary tertiary azeotropic formulation which provides a direct replacement for trichloroethylene, n-propylbromide and other chlorinated solvents.

ProSolv® is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with a low environmental impact in the precision engineering industries. Read more.

The best solutions for vapour degreasing, corrosion protection, metal cleaning and surface treatment

EnviroTech Europe has the complete answer for the cleaning and preparation of metal, plastic, and composite surfaces – ready for finishing by electroplating, painting and powder coating.

We can offer a range of approved products tailored to your industry, which are cost effective, energy efficient, safe for operators and the environment. Expert technical support and training is provided throughout Europe.

Let us find the best solution for your metal cleaning and surface treatment needs.

Introduction Video

Applications and Case Studies

general purpose cleaning agent

EnviroTech Europe has been supplying metal cleaning and surface treatment products for over 30 years​ and we continue to innovate new ideas with technology and legislation.

Latest Article: Aquus -CL-One Water based, non-toxic, general purpose industrial cleaning agent… read more.

SuperCORR A -Advanced corrosion protection for aircraft

Advanced corrosion protection for aircraft - SuperCORR A lubricates and protects mechanical and electrical flight controls in surveillance aircraft.Super CORR A provides advanced corrosion protection for aircraft - It lubricates and protects mechanical and electrical flight controls and electronic equipment in Lockheed Martin P-3C Orion aircraft flown by...

read more

Replace Trike / nPB

replace n-Propyl Bromide

The deadline for solvents needing authorisation was July 2020

Are you still using 1-Bromopropane (n-propylbromide or nPB) for Vapour Degreasing?  nPB needed authorisation for use from  July 2020. Click here for nPB replacement.

Are you still using trichloroethylene (Trike) for Vapour Degreasing? Trichloroethylene needed authorisation for use from April 2016. Click here for trichloroethylene replacement.

FREE Trial Sample

free trial sample of Aquus CL-one

  • We are looking for companies who would be willing to put one of our latest products to the test.  All we ask in return is you share the results with us, with no obligation to purchase after. Although we think you will find out the advantages of Aquus CL-One for yourself.
  • We are looking for people in :
    Maritime: General vessel cleaning, Bilge cleaning
    Bulk Storage tanks: Cleaning and removal of oils / sludge
    Railway: Bulk storage containers, Train and carriage washing
    Automotive: Parts washing
    Precision Engineering: Parts washing
    Printing Industry: General machine cleaning
    Laundry: Industrial laundry

Quality Management

ISO-9001-2015

EnviroTech Europe is accredited to ISO 9001:2015 for marketing and distribution of specialist metal cleaning and corrosion protection products. A copy of our certificate can be found here.

A list of organisations and companies who have approved our products is available here.

Product Range

ProSolv5408e

Environmentally sustainable high performance vapour degreasing solvent

Zero ozone depletion (ODP) and global warming potential (GWP). Sustainable and secure for future use as your forever solvent.

ProSolv®5408e is a new solvent blend from EnviroTech Europe which ticks all the boxes with the perfect profile for a vapour degreasing solvent. Soft on the environment and safer for users. High performance, improved cleaning, lower costs.

Lower boiling point, economical with energy with low solvent losses, faster production, reduced costs, easy handling. Exceptionally low surface tension to penetrate micron sized holes and close contact surfaces.  ProSolv®5408e is the perfect replacement for hazardous solvents such as trichloroethylene, nPB (n-propyl bromide), perchloroethylene or flammable solvents used in general engineering cleaning processes. Read more,

Super CORR A

Advanced lubricant and corrosion protection compound

Specialist barrier film corrosion protection products, based on synthetic materials to provide safe, effective, environmentally friendly solutions to lubrication and corrosion problems.

SuperCORR A is a proprietary formulation containing extremely long lasting anticorrosion inhibitors, which also give superior lubrication coefficients and protects components against moisture. This unique, water displacing lubricant, with synthetic corrosion prevention compounds is tested and proven non-flammable and environmentally friendly. Read more.

Vapour degreasing solvent for
precision metal cleaning

The new drop in replacement formulation from EnviroTech builds on 30 years of experience supplying the EnSolv® range of powerful and reliable vapour degreasing solvents to industries worldwide.  

The EnSolv CC-A® formulation responds to the need for high performance vapour degreasing  solvents for critical cleaning in general engineering, aerospace, medical optical and electrical industries.

EnSolv CC-A® contains a proprietary blend of inhibitors and stabilisers for the solvents to prevent water staining and corrosion of yellow metals such as copper, brass and bronze which can be a problem with some other solvents. Read more.

Metal Pretreatment

General purpose industrial cleaning agent

A non-toxic, water based surfactant system which exhibits a combination of characteristics not found in any comparable commercially available system.

Aquus CL-One is biodegradable, non-flammable, non-toxic at used concentrations and, unlike almost all other surfactant systems, is both hydrophilic (water attracting) and oleophobic (oil-repelling).

Aquus CL-One offers excellent emulsion-breaking capability in addition to its unusual combination of properties that makes it so attractive for such a broad range of industrial applications. Read more.

Solvent Cleaners

Non-chlorinated Industrial solvent cleaners

Non chlorinated, industrial wipe, brush, dip and immersion cleaning solvents for removing dirt, oil, grease and other contaminants without causing harm or leaving residue.

Clarea® flammable and non-flammable degreasing solvents are used as parts washers in manufacturing and automotive industries or are used as wipe cleaners for large surface areas prior to painting or powder coating.

A growing concern regarding environmental and health hazards of the most commonly used chlorinated solvents as industrial degreasing agents has led to the formulation of our range of safer cleaning solvents. Read more.

Critical Cleaning

High performance vapour
degreasing solvent

Are you still using Trike or nPB for Vapour Degreasing?

Trichloroethylene has not been obtainable for metal cleaning without authorisation since April 2016 . N-Propylbromide will require ‘authorisation’ for use in vapour degreasing and metal cleaning from July 2020.

ProSolv® enables high performance cleaning at a lower cost than other solvent cleaners. A vapour degreasing solvent based on a proprietary tertiary azeotropic formulation which provides a direct replacement for trichloroethylene, n-propylbromide and other chlorinated solvents.

ProSolv® is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with a low environmental impact in the precision engineering industries. Read more.