Advanced corrosion protection for electronics systems in sewage treatment plants
Electrical control systems in sewage and water treatment plants face some of the harshest operating conditions imaginable – continuous exposure to moisture, hydrogen sulfide (H2S) and other aggressive gases creates a relentlessly corrosive atmosphere. Without robust protection in place, components deteriorate ahead of schedule, triggering costly downtime and serious safety risks.
Corrosion is an insidious and costly problem that will eventually degrade virtually every metal and metal alloy. Nowhere is this more critical than in electrical and electronic control systems, where corroded components, connectors and switches can trigger failures at the worst possible moment.
To combat this, engineers are increasingly turning to specialized corrosion inhibitors and protective coatings. These solutions create a reliable barrier against corrosive agents without compromising electrical performance. Pairing harsh-environment-rated enclosures with proactive maintenance and considered material selection further extends system life. Getting corrosion protection right means fewer unplanned shutdowns and longer-lasting control infrastructure across the entire water treatment network.
Specialist corrosion protection for electronics in moist environments
EnviroTech Europe supply advanced corrosion protection products, based on approved synthetic materials, to provide high quality solutions to a diverse range of lubrication and corrosion problems.
Super CORR A is a “self-healing” ultra-thin film water displacing lubricant with long-lasting, anti-corrosion inhibitors providing a superior lubrication coefficient and protection against moisture, wear, general and fretting corrosion, static electricity, corona, and other electro migration problems. The non-flammable film is only 7 microns (0.007mm) in thickness, will not harden or crack, is not a wax or oil-based product and is formulated without sulphates, chlorides or halogens.
Super CORR A has a proven performance record in protecting electrical components, systems, connectors and electronics. The coating will also prevent the ingress of moisture and other contaminants onto the connector surfaces.
Removal of surface contamination from the metallic contact surfaces on switches and circuit breakers is essential to ensure fault free operation. An inert compound that neither reduces nor increases the electrical conductivity, Super CORR A ’s unique formulation lifts and removes dust and soils from the metal contact surfaces. It also provides long term protection from corrosion and electrical arcing that can lead to shorts and subsequent circuit failures. The aerosol spray is supplied with a flexible tube applicator which allows the protective coating to be applied accurately even in difficult to get to places.
EFFICIENT AND ECONOMICAL
- Extremely long-lasting, specially formulated and proprietary anti-corrosive inhibitor.
- Eliminates premature failure of components created by moisture, general or fretting corrosion.
- Prevents deterioration and contamination on all surfaces of electronic and electrical equipment and mechanical close tolerance moving components.
- Reliability increased, maintenance intervals increased and costs reduced, manufacturers save costly warranty service calls or product re-call.
- Non-flammable.
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/supercorr-a for information about other uses and applications for Super CORR A.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
For more advice, please telephone us on +44 (0) 20 8942 9177 or use our website contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page: