Latest Articles
VIDEO: Choosing the correct vapour degreasing equipment to suit your cleaning process
Choosing the correct vapour degreasing equipment to suit your cleaning process
Choosing the correct vapour degreasing equipment is crucial for ensuring the efficiency, safety, and effectiveness of your cleaning process. Envirotech Europe offer a full range of the latest ultrasonic vapour degreasing equipment, using the most up-to-date technology. We offer customizable systems with options such as semi or full automation, including in/out roller beds, basket rotation or basket agitation.
Several key considerations need to be made to ensure your new equipment meets your specific cleaning needs such as efficiency requirements, and regulatory compliance. Here are the main factors to consider:
Types of Contaminants and Parts:
Identify the types of contaminants (oil, grease, flux, particulates) that need to be removed. Make sure the degreasing solvent and process are compatible with the materials of the parts being cleaned. Evaluate the complexity and size of the parts. Complex geometries may require more sophisticated equipment to ensure thorough cleaning. Components with blind holes may require rotation on the equipment.
Vapour degreasing solvents such as ProSolv® / ProSolv®5408e from Envirotech Europe feature high solvency power and have the ability to remove common contaminates. These solvents feature low surface tension and ensure the highest levels of cleanliness for even the most complex of components.
Production Volume and Throughput:
Choose between batch processing units for smaller volumes or continuous processing units for high-volume operations. Consider the cycle time required to clean each batch or part and make sure this aligns with your production schedule. Vapour degreasing equipment provided by Envirotech Europe will achieve excellent levels of cleanliness in a matter of minutes, leaving components clean, rinsed and dried with no residue.
Solvent Selection and Regulations:
Check the solvent is compatible with both components and equipment. Consider solvents with appropriate boiling points, cleaning efficiency, and drying times for your specific application. Make sure the solvent complies with local and international environmental and safety regulations.
In December 2022 3M™ announced plans to stop producing per- and polyfluoroalkyl substances (PFAS)
substances in its product line by the end of 2025. This phase-out affects the 3M™ Novec™ range of engineered fluids. Envirotech Europe offers the very latest vapour degreasing solvent chemistries helping to future-proof your process. This includes the ProSolv® range of direct replacements for 3M™ Novec™ engineered fluids. If your organisation is using 3M™ Novec™ fluids, contact Envirotech Europe to discuss suitable replacements.
ProSolv®5408e offers excellent levels of cleanliness whilst meeting health, safety and environmental considerations. It is a PFAS-free, high performance vapour degreasing solvent produced in the UK, and guarantees the highest levels of cleanliness. Compatible with most common alloys, ProSolv®5408e features high solvency power, low surface tension, is non-flammable, low risk phrase, Low GWP (global warming potential of 1) and zero ODP (ozone depletion potential).
System Design and Features:
Open-Top vs. Enclosed Systems: Open-top systems are simpler and less expensive but may have higher emissions. Enclosed systems offer better emission control and safety features. Determine if you need manual, semi-automated, or fully automated systems based on labour availability and consistency requirements. Ensure the equipment can accommodate the largest parts you need to clean and has the capacity for your production volume.
Cost and Return on Investment (ROI):
Consider the purchase cost of the equipment and factor in the cost of solvents, energy consumption, maintenance, and labour. Evaluate potential savings from reduced solvent usage, improved cleaning efficiency, and lower emissions.
Safety and Compliance:
Make sure the equipment has adequate safety features to protect workers from exposure to harmful solvents. Verify that the equipment and process comply with relevant health, safety, and environmental regulations. Ensure the equipment has effective fume extraction to protect workers and comply with regulations. Equipment with advanced control systems can reduce the risk of human error and improve safety. For flammable solvents, make sure the equipment is equipped with appropriate fire suppression systems. Compliance with occupational health and safety regulations is essential to protect workers.
Energy Efficiency:
Look for equipment with efficient heating and cooling systems to minimize energy usage and reduce solvent consumption. Equipment with efficient solvent recovery and recycling can reduce operating costs and environmental impact. Envirotech Europe offers the latest low boiling solvents massively reducing energy consumption usage.
Supplier Support and Service:
Choose a reputable supplier with experience in vapour degreasing. EnviroTech Europe has over thirty years of experience in the vapour degreasing and solvent cleaning industry. Ensure the supplier offers good technical support, training, and maintenance services. Check if the supplier can customize the equipment to meet your specific needs. Envirotech Europe offers technical support and advice on your equipment and solvent compatibility.
Testing, Validation and other Considerations:
Before committing to a purchase, conduct pilot testing with sample parts to ensure the equipment meets your cleaning requirements. Envirotech Europe offer free testing and validation trials. Ensure the equipment can consistently meet the cleanliness standards required for your specific application. Look for energy-efficient equipment designs to reduce operational costs. Make sure the system has effective emission control features, such as refrigerated coils or carbon absorption systems. Choose equipment that is easy to maintain and service to minimize downtime.
Conclusion:
To select the correct vapour degreasing equipment, carefully evaluate your cleaning requirements, production needs, solvent compatibility, safety, and regulatory considerations. Collaborate with reputable suppliers to ensure you choose a system that provides optimal performance and compliance with all relevant standards.
Envirotech Europe supply a full portfolio of vapour degreasing equipment as well as the latest precision cleaning chemistries for both solvent and aqueous cleaning, including free qualification trials and free on-site technical visits to advise on your specific circumstances. Please visit our website to view specific vapour degreasing equipment and solvent cleaning solutions.
FURTHER INFORMATION
Please visit www.envirotech-europe.com/vapour-degreasing-equipment for more information.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
For more advice, please telephone us on +44 (0) 20 8281 6370 or use our website contact form. All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
VIDEO: Replacements for 3M™ Novec™ Engineered Fluids
ARE YOU AFFECTED BY THE PHASE-OUT OF 3M™ NOVEC™ ENGINEERED FLUIDS?
At Envirotech Europe we can offer replacements with our ProSolv® range for all 3M™ Novec™ solvent cleaning fluids. We understand the uniqueness of every precision cleaning application and provide free on-site visits, technical support and cleaning trials when required.
We can provide a full assessment of your current precision cleaning process to put in a plan to help ensure a seamless transition.
Future-proof your cleaning process with our new ProSolv® range additions.
We have added several cost effective and efficient precision cleaning process formulations to our range of ProSolv® vapour degreasing solvents, offering an immediate drop in replacements for the 3M™ Novec™ engineered fluids.
FURTHER INFORMATION
Please visit https://www.envirotech-europe.com/vapour-degreasing-solvents/replace-3m-novec-engineered-fluids/ for more information.
For more advice, please telephone us on +44 (0) 20 8281 6370 or use our website contact form. All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Related Posts
The importance of corrosion protection in the aircraft and aviation industry
Aircraft corrosion protection - The importance of corrosion protection in the aircraft and aviation industry
Aircraft corrosion protection is crucial for several reasons, encompassing safety, economic efficiency, and regulatory compliance. Here are the key aspects highlighting its importance:
Safety:
Structural Integrity – Corrosion can weaken the structural components of an aircraft, leading to potential failures. This compromises the safety of the aircraft, posing risks to both passengers and crew. Component Reliability – Corrosion can affect critical components such as landing gear, control surfaces, and engines, potentially leading to malfunctions or failures during flight.
Economic Efficiency:
Maintenance Costs – Regular and effective corrosion protection reduces the frequency and severity of repairs needed. This minimizes downtime and maintenance costs. Longevity of Aircraft – Proper corrosion protection extends the service life of an aircraft, delaying the need for costly replacements.
Performance:
Fuel Efficiency – Corrosion can increase the drag on an aircraft by affecting its aerodynamic surfaces, leading to higher fuel consumption. Weight Management – Corroded components might need to be reinforced or replaced with heavier parts, impacting the aircraft’s weight and balance.
Regulatory Compliance:
Adherence to Standards – Aviation authorities such as the FAA (Federal Aviation Administration) and EASA (European Union Aviation Safety Agency) have strict regulations regarding aircraft maintenance and airworthiness, including corrosion control measures. Inspection Requirements – Regular inspections mandated by regulatory bodies often focus on detecting and addressing corrosion, ensuring that aircraft meet the necessary safety standards.
Environmental Considerations:
Material Conservation – Effective corrosion protection reduces the need for frequent replacement of parts, conserving materials and reducing waste. Chemical Use – Proper corrosion management minimizes the use of harsh chemicals required for treating advanced stages of corrosion, benefiting environmental sustainability.
Operational Readiness:
Reliability – Corrosion protection ensures that aircraft remain in optimal condition, ready for operation without unexpected delays due to maintenance issues. Fleet Management – For airlines, maintaining a corrosion-free fleet ensures better scheduling and utilization of aircraft, enhancing overall operational efficiency.
Corrosion Protection Solutions for Aircraft:
Protective coatings and paints act as barriers between the aircraft’s metal surfaces and the environment. One such coating is Super CORR A advanced lubricant and corrosion inhibiting compound, based on approved synthetic materials, to provide quality solutions to a diverse range of lubrication and corrosion problems. A unique and proprietary formulation with long-lasting, anti-corrosion inhibitors providing a superior lubrication coefficient and protection against moisture, wear, general and fretting corrosion, static electricity, corona, and other electro migration problems.
Conclusion:
The importance of aircraft corrosion protection cannot be overstated. It is a fundamental aspect of aircraft maintenance that ensures safety, economic viability, regulatory compliance, and environmental sustainability. Effective corrosion control measures are integral to maintaining the integrity and performance of aircraft, ultimately supporting the reliability and efficiency of the aviation industry.
SuperCORR A Specialist barrier film corrosion protection for aircraft
EnviroTech Europe supplies advanced corrosion protection products, based on approved synthetic materials, to provide quality solutions to a diverse range of lubrication and corrosion problems.
Super CORR A is a unique and proprietary formulation with long-lasting, anti-corrosion inhibitors providing a superior lubrication coefficient and protection against moisture, wear, general and fretting corrosion, static electricity, corona, and other electro migration problems. The non-flammable film is only 7 microns (0.007mm) in thickness, is not a wax or oil-based product and is formulated without sulphates, chlorides, petroleum-based material, or halogens, to meet the EU RoHS directive.
The use of Super CORR A for corrosion protection can not only bring financial savings in reduced maintenance and replacement costs but more importantly greater safety. It is much simpler and a lot less costly to prevent corrosion than to repair or replace the damaged equipment or component that failed because of corrosion.
Super CORR A is a non-flammable “self-healing” ultra-thin film lubricant with a proprietary corrosion preventive compound that will not harden or crack, is not a wax or oil-based product and is formulated without sulphates, chlorides or halogens.
Super CORR A also inhibits corrosion caused by exposure to both fresh and salt water moisture as well as the corrosive vapours from Sulphur dioxide (SO2), Nitrogen dioxide (NO2), Hydrogen Sulphide (H2S), Ammonia (NH3), and Chlorine (CL12) based gases found in the aircraft industry.
Super CORR A is packaged in aerosol cans making application to component parts easy for engineering crews in difficult locations and conditions. Unpainted mild steel will not rust on exterior surfaces directly exposed to sea water environments for at least 6 months, protecting electrical connectors, switches, chains, drive shafts from corrosion while maintaining lubrication on moving surfaces.
EFFICIENT AND ECONOMICAL
- Extremely long-lasting, specially formulated and proprietary anti-corrosive inhibitor.
- Eliminates premature failure of components created by moisture, general or fretting corrosion.
- Prevents deterioration and contamination on all surfaces of electronic and electrical equipment and mechanical close tolerance moving components.
- Reliability increased, maintenance intervals increased and costs reduced, manufacturers save costly warranty service calls or product re-call.
HISTORY
Super CORR A was originally developed for the U.S. Air Force to comply with military specifications and to prevent electrical and electronic components from systems failures caused by corrosion. It became the industry standard for avionic corrosion protection within MROs (maintenance, repair and operations) and OEMs (overhaul and original equipment manufacturers). It’s unique ability to displace water and provide a performance enhancing level of corrosion protection has led to it being used in many other applications and industries worldwide.
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/supercorr-a for for information about other uses and applications for Super CORR A.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
For more advice, please telephone us on +44 (0) 20 8281 6370 or use our website contact form. All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Latest News
Methylene chloride based vapour degreasing solvent with a unique blend of surfactants giving it superior cleaning quality
EnSolv® CC-A is a methylene chloride based vapour degreasing solvent with a unique blend of surfactants giving it superior cleaning quality
EnSolv® CC-A responds to the need for high performance vapour degreasing solvents for critical cleaning in general engineering, aerospace, medical optical and electrical industries. It builds on 30 years of experience supplying the EnSolv® range of powerful and reliable vapour degreasing solvents to industries worldwide
EnSolv® CC-A removes cutting oils, lubricants, lapping compounds grinding pastes and water based cutting oils or fluids. This complex synergistic blend utilises environmentally compliant solvents combined with selected surfactants to remove oils and lubricants to the highest standards for critical cleaning applications and releases and suspends inorganic solids and soils such as fingerprints, polishing compounds and grinding paste from finely finished and highly polished surfaces such as stainless steel and plated parts, optical lenses and components for medical appliances.
SAFE FOR USERS AND THE ENVIRONMENT
Environmentally friendly cleaning all the constituents of EnSolv® CC-A are environment friendly and compliant with REACH. This proprietary blend has no global warming potential (GWP) no ozone depletion potential (ODP) does not produce ozone at ground level and is biodegradable. EnSolv® CC-A addresses many of the problems faced by the engineering industries in meeting environmental legislation.
Easily biodegradable all the components of the EnSolv® CC-A formulation are widely used in industry but only trace elements have been detected in atmosphere and they are not detectable in rivers, oceans or ground water. This is attributed to its high volatility and biodegradability by naturally occurring organisms. Released into the atmosphere it is photochemically degraded reacting with naturally occurring hydroxyl radicals producing only carbon dioxide and hydrogen chloride simple chemicals already present in the environment.
No depletion of the ozone layer and no global warming. EnSolv® CC-A has an atmospheric lifetime of only 6 months and does not accumulate in the atmosphere so is not transported into the ozone layer. The most urgent challenge for the future is reduction of gases which produce global warming. The solvents and any breakdown products of this formulation do not produce greenhouse gases and the reduced energy needs of vapour degreasing with EnSolv® CC-A lower the power station production of CO2 for equivalent work throughput.
No ground level ozone production – authorities are becoming increasingly concerned at ground level pollution causing increased asthma and bronchial diseases much of it due to photochemical production of Ozone affecting children and adults. EnSolv® CC-A has a minimal impact on ozone formation with an extremely low photochemical ozone creation potential (POCP).
Reduced solvent emissions (VOCs). Improving air quality is a high priority for the European Union and governments worldwide with the elimination of VOCs as a high priority. The use of EnSolv® CC-A with its excellent environmental profile assists the engineering industry to meet increasingly severe environmental legislation on solvent emissions allowing continued use of vapour degreasing with all the production benefits it offers.
PRODUCT BENEFITS
Designed for vapour degreasing
Removes oil, grease and soils fast
Simple drop-in replacement for n-propyl bromide and trichloroethylene
Low surface tension
Reduced costs
Compatible with all metals
User friendly
Increased production
Faster cleaning cycles
Components easily handled after cleaning
Safe for the environment
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/ensolvcc-a for information about other uses and applications.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
Share this page:
Related Posts
Eliminate bad smells using unique concentrated water based cleaning system
Aquus® CL-One is the ALL purpose concentrated cleaning system based on an innovative formulation of surfactants which also controls odours and will eliminate bad smells at source.
The unique combination of properties exhibited by Aquus CL-One offers excellent emulsion-breaking capability in addition to its unusual combination of properties that makes it so attractive for a wide range of industrial applications including an unusual application which is discussed below in more detail, utilising these properties to control odours and eliminate bad smells at source.
CONTROL ODOUR BY ELIMINATING UNPLEASANT SMELLS AT SOURCE
Aquus CL-One eliminates odour problems caused by bacteria and other organisms. No fragrance or other masking agents are used, the odour is very effectively eliminated at source. Conventional masking agents use fragrances or enzymes which act slowly and are less effective and more expensive than the Aquus CL-One alternative which uses a totally different approach to these problems.
MANY APPLICATIONS FOR ODOUR CONTROL
Odour control is needed where cleaning is performed in food preparation, processing equipment and containers, sewage treatment plants and in other waste-water facilities.
VOLATILE ORGANIC COMPOUNDS
Aquus CL-One breaks down the organic compounds responsible for the release of the volatile organic compounds (VOCs) producing the unpleasant smells associated with some commercial and industrial processes and systems.
Aquus CL-One eliminates the ability for bacteria to produce the odour producing VOCs by disrupting the integrity of the cell walls. Odour producing microorganisms have cell walls made up of organic materials including lipids (fats). The alkalinity and surface-active ingredients of the Aquus formula breaks down the cell walls of the organism which protect the inner workings. Once compromised the bacteria can no longer absorb nutrients and eliminate waste. This kills the organism which then cannot generate the VOCs which produce the smells.
ADVANTAGES OVER OTHER METHODS
Aquus CL-One has considerable advantages over the toxic, fragrance or enzyme based alternative odour control products which only mask the smells. Enzyme based formulas need regular maintenance to keep the enzymes active and work slowly. Masking agents are usually ineffective and expensive.
Aquus CL-One eliminates completely the odours and smells associated with these organic materials including bacteria and other organisms simply and effectively.
ENGINEERING WASTEWATER TREATMENT SYSTEMS
Aquus CL-One is extremely effective in separating oil, water, and solids in drains, conveyor traps and sumps on automatic honing, turning and grinding machines when using water-based lubricant and cooling liquids.
Emulsions are broken allowing cleaned metal dust, shavings and dirt to precipitate to the bottom, the solution of Aquus CL-One and water retains the active cleaner in the middle layer, oil and grease float to the top. The efficiency of oil/water separators in plant waste treatment systems are significantly increased while the disposal of toxic waste is greatly reduced.
FARMING AND AGRICULTURE
Farming and agriculture require reliable water-based cleaners for the innumerable cleaning applications needed particularly where animal husbandry is involved. Scrupulous cleaning of surfaces on rails, floors and walls is essential for the health of the animals. The unique bacterial destruction abilities described earlier is very effective in odour control in many farming applications
Aquus CL-One is the concentrated water activated cleaner which is used at different dilutions to meet the requirements of the many applications and challenges met in farming and agriculture. Aquus CL-One which is completely biodegradable within 30/40 days, is not toxic and not considered a hazard which is particularly important in sensitive environmental sites and situations. Safe for use with any application equipment such as high or low-pressure washers, spray washers or dip tanks it can be used with mops, brooms etc by operators without needing personal protective clothing.
The unique combination of oleophilic and hydrophilic properties encourage sedimentation of solids from liquids in wastewater separation tanks and as the cleaner solution can be recycled and reused until biodegradability reduces its effectiveness it is very economical in use. As an example, in normal use a one litre bottle is mixed with 40 litres of water to activate the cleaning solution which in turn can be recycled many times.
HOSPITALS AND HEALTHCARE
Cleaning of soiled and contaminated surfaces in hospitals, nursing homes and other medical facilities is essential to control bacterial contamination. Aquus CL-One cleaner can be used for all cleaning applications which reduces time and costs by removing the need for multiple cleaning products usually needed to deal with the challenges presented by the wide range of soils, oils, blood, body liquids and other contaminants which need to be removed.
Aquus CL-One is safe for the environment and users, contains no solvents and is biodegradable within 30 days. With only one product for all cleaning applications incorrect selection or dangerous uses can be avoided.
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/aquus-cl-one for information about other uses and applications for Aquus CL-One.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
Share this page:
EnviroTech Europe 2022 Brochure now available
Advanced solutions for vapour degreasing, corrosion protection, metal cleaning and surface treatments.
EnviroTech Europe are specialists in metal, plastic and other substrate cleaning, pre-treatment and protection. We offer a range of approved products tailored to your industry, which are cost effective, energy efficient, safe for operators and the environment.
We are pleased to introduce our range of products in a new 2022 products brochure, viewable on our website and downloadable in PDF format.
Our products are used in the following industries:
Electronics and Electrical
Environmental
General Cleaning
Industrial and Manufacturing
Marine and Maritime
Mechanical Engineering
Medical Device Manufacturing
Military
Motorsport
Power Generation
Railways and Automotive
To view our 2020 Product Brochure please visit www.envirotech-europe.com/brochure.
All products are supplied and supported by EnviroTech Europe Ltd.
Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Vapour degreasing solvent for precision metal cleaning
EnSolv® CC-A Vapour degreasing solvent for precision metal cleaning
The EnSolv® CC-A formulation for precision metal cleaning responds to the need for high performance vapour degreasing solvents for critical cleaning in general engineering, aerospace, medical optical and electrical industries.
EnSolv® CC-A removes cutting oils, lubricants, lapping compounds grinding pastes and water based cutting oils or fluids. This complex synergistic blend utilises environmentally compliant solvents combined with selected surfactants to remove oils and lubricants to the highest standards for critical cleaning applications and releases and suspends inorganic solids and soils such as fingerprints, polishing compounds and grinding paste from finely finished and highly polished surfaces such as stainless steel and plated parts, optical lenses and components for medical appliances.
EnSolv® CC-A is a proprietary blend of inhibitors and stabilisers for the solvents to prevent water staining and corrosion of yellow metals such as copper, brass and bronze which can be a problem with some other solvents.
EnSolv® CC-A is non-flammable, stable and specifically formulated for use in any vapour degreasing equipment with the added advantage of lower solvent usage, greater stability and reduced costs. The formulation is compliant with all current environmental and user safety legislation.
Product Benefits
Designed for vapour degreasing
Removes oil, grease and soils fast
Simple drop-in replacement for n-propyl bromide and trichloroethylene
Low surface tension
Reduced costs
Compatible with all metals
User friendly
Increased production
Faster cleaning cycles
Components easily handled after cleaning
Safe for the environment
Talk to us about whether EnSolv® CC-A is the best choice for your application. Advice, literature, changeover instructions are all available to make the change quickly, easily and at no extra cost of usage.
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/ensolvcc-a for information about other uses and applications.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance.
For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Related Posts
Non chlorinated industrial solvent cleaners
Clarea® industrial solvent cleaners – for safe removal of dirt, oil, grease and other contaminants
Clarea® industrial solvent cleaners are a range of highly refined hydrocarbon based
degreasing solvents with very high cleaning power and low odour, which can be used as an
alternative to other hazardous solvents.
Used throughout industry to remove oils, greases, hydraulic fluids, cutting fluids and a wide
variety of hydrocarbon based protective coatings. The solvent cleaners can be used in dip,
brush or in hand-wipe applications.
Clarea® products leave minimal residues on drying surfaces and are compatible with all
metals and many plastics and composite materials. Contains no halogens such as chlorine or
fluorine.
Clarea® HC40 has a relatively fast evaporation rate with low odour and is suited to hand
wipe and brush cleaning and air dries. Flash Point over 40°C.
Clarea® HC62 is a non-carcinogenic solvent mixture that is safe to use in many applications
and is a not classified as flammable. Flash Point over 60°C.
Clarea® industrial solvent cleaning solvents are one of the ranges of metal cleaning and
surface treatment products from EnviroTech Europe Ltd.
EFFICIENT AND ECONOMICAL
- Versatile and cost-effective solutions for all your industrial cleaning
- Minimal odour and low toxicity for operators
- Multipurpose uses can reduce the inventory of cleaning fluids.
- Flexible uses – evaporation rates suitable for hand wipe, spray, or immersion tank cleaning
- Clarea HC40 for brush and hand wiping, air dries. Flash point 40°C
- Clarea HC62 for spray or immersion cleaning Flash point 62°C
- Contains no chlorine, other halogens or stabilisers
- Compatible with all metals and composites and most plastics
- Excellent pre-cleaner for paint or powder coatings
- Safe, reliable, environmentally friendly cleaning
We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance.
For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Related Posts
SuperCORR A -Advanced corrosion protection for aircraft
Advanced corrosion protection for aircraft – SuperCORR A lubricates and protects mechanical and electrical flight controls in surveillance aircraft.
Super CORR A provides advanced corrosion protection for aircraft – It lubricates and protects mechanical and electrical flight controls and electronic equipment in Lockheed Martin P-3C Orion aircraft flown by air forces around the world for anti-submarine and maritime surveillance, also used in searches for missing ships or aircraft.
The Royal Australian, Korean and Japanese Air Forces were employed in the search for the Malaysia Airlines flight MH370 Boeing 777 passenger jet which disappeared on a scheduled flight in March 2014. The search for debris in a vast area of ocean, bigger than the land area of Europe, southwest of Perth, Australia operated for thousands of hours at low levels but failed to locate any debris and was suspended in 2017.
The maintenance schedules specify Super CORR A to lubricate and protect the flap tracks and screw jacks in the wings of the aircraft which are constantly exposed to extremely corrosive salt laden air as the aircraft in search mode can be flown at very low altitudes of hundreds of feet for long periods.
Super CORR A lubricant and protective coating is widely used by the military, electrical, electronics and aerospace industries for critical applications to give the protection needed in extreme conditions. Super CORR A deposits a dry protective film with excellent corrosion protection and lubricant properties plus the added advantage of a hydrophobic surface rejecting water that ensures the easiest and best connections for very close spaced connectors, contacts, wiring and moving parts
The U.S. Navy selected Super CORR A after exhaustive testing using American Society for Testing and Materials (ASTM) Standard B117- Standard Practice for Operating Salt Spray Apparatus.
Super CORR A, a Type I, Grade B Corrosion Preventative lubricant out-performed 11 other products in comparative testing to identify the best product to protect and lubricate the flap tracks and screw jacks on the aircraft.
The flap tracks, located in the aircraft’s wings, are what the flaps slide on when they move up or down to lower or increase speed. The screw jacks engage and retract the wing flaps. Corrosion on any of the surfaces can lead to snatching or vibration which can affect the pilot’s control
Due to constant operation in salty and corrosive atmospheres which need post-flight rinses and monthly washing down of the aircraft re-lubrication and corrosion treatment for the flap tracks and screw jacks is required each time, with conventional lubricants, to prevent rusting. Super CORR A was evaluated against competitive products under the Federal Test Method Standard #791B, using a five percent Salt Spray Corrosion Test.
Super CORR A far exceeded the performance of the other products evaluated. After over 200 hours of continuous exposure to salt spray corrosion, Super CORR A protection actually increased over time where all the other, similar, products failed early or contributed to an increase in corrosion.
The accelerated salt fog corrosion testing demonstrated that the application of
Super CORR A which complies with MIL-DTL-87177B (revised MIL-L-87177A) also increased electrical operation to 1400 hours versus 100 hours for the control product used at that time. Technical manuals were updated to include the application for electrical and mechanical parts for civilian and military operations.
The most important conclusion from the historical data and prototype testing is the availability of this excellent corrosion preventive compound that has dry film lubricant properties. The application of Super CORR A on aircraft components can reduce maintenance man hours, reduce part replacement costs, increase life of aircraft, safety, and readiness for operations.
Estimates for the maintenance cost for the US Air Force F-16 fleet can reach $500 million per year, the use at all military branches could reach billions of dollars per year. Applications at locations tested by the U.S. Air Force are not normally treated with corrosion prevention and control lubricants (CPC’s). These are the electrical connectors that are susceptible to subtle and not so subtle forms of corrosion that can interfere with the electrical operation of the F-16.
Testing by the U.S. Navy at NADEP Jacksonville incorporates not only electrical connectors, but mechanical and structural components as well. Future uses will also include ground support equipment. The properties of Super CORR A are such that it can be used in a wide variety of applications and on any materials, metal or plastic. Properties of the Super CORR A far exceed the requirements defined by the MIL-L-87177A specification. Many of the beneficial properties of the product are not required in the MIL specification.
EnviroTech Europe is a manufacturer and distributor of anti-corrosion, lubricants and coatings used on wiring, connectors, switches, circuitry, avionics. Read the full report – ‘Use of MIL-L-87177A as a corrosion prevention compound’ in our Library https://www.corrosion-protect.com/resources
Please visit our website https://www.envirotech-europe.com/supercorr-a for for information about other uses and applications for Super CORR A.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance.
For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Aquus CL-One general purpose industrial cleaning agent
Aquus® CL-One concentrated general purpose industrial cleaning agent –
Non-toxic, water based cleaning and protection of metal surfaces – formulated to offer one solution for all cleaning applications in manufacturing, engineering and general maintenance.
Aquus CL-One is a non-toxic general purpose cleaning agent based on a mixture of surfactants and exhibits a unique combination of characteristics not found in other comparable commercially available products.
Aquus CL-One is formulated to offer ONE SOLUTION for all cleaning applications and reduces time and costs by removing the need for multiple cleaning products usually needed to deal with the challenges presented by the wide range of soils, oils and other contaminants which need to be removed.
Aquus CL-One is biodegradable, non-flammable, non-toxic at used concentrations and, unlike almost all other surfactant systems, is both hydrophilic (water attracting) and oleophobic (oil-repelling).
Aquus CL-One offers excellent emulsion-breaking capability in addition to its unusual combination of properties that makes it so practical for a wide range of industrial applications.
Safe for the environment and users, contains no solvents and is biodegradable within 30 days. One of the innumerable industry specific applications are discussed below but many more will be experienced in day-to-day operations. With only one product for all cleaning applications incorrect selection or dangerous uses can be avoided.
Concentrated Aquus CL-One chemistry is activated by water, varying concentration levels allows the most economical solution to be chosen for specific applications from parts cleaning to surface preparations for finishing or heavier soiling on process machines all from one product. Some of the applications are discussed below.
MANUFACTURING, ENGINEERING and MAINTENANCE
Formulated to tackle the numerous cleaning applications required by the manufacturing and engineering industries. Concentrated Aquus chemistry is activated by water, varying concentration levels allows the most economical solution to be chosen for specific applications from parts cleaning to surface preparations for finishing or heavier soiling on process machines all from one product. Some of the applications are discussed below. Our applications experts and samples of the product are available by completing the contact form.
PARTS AND COMPONENT CLEANING
Ideally suited for cleaning protective coatings, grease and soils from used or parts during manufacturing processes. Aquus CL-One can be used in parts washing equipment or dipping tanks without modifications and leaves no residue after drying. Oil and grease separate from the water and coalesces on the surface of the cleaning solution which can then be skimmed off for recovery and recycling. Precipitated solids free of hydrocarbons can be removed by settlement or in filtration systems. The cleaning solution can be reused continuously within its chemical effectiveness parameters for efficient and economical use.
GENERAL CLEANING
Aquus CL-One is remarkably efficient removing oils, greases, and accompanying dirt from most surfaces. It can be applied by wiping surfaces, mopping floors or in rotary floor cleaning machines, or by low or high-pressure spray. Aquus CL-One is also an effective cleaner in industrial kitchens removing grease and baked on deposits on internal surfaces of ovens and trays. For maintenance of machines, engines etc oil and grease is easily removed pre and post assembly making inspection and repair easier, quicker and cheaper by returning equipment to use.
WASTE TREATMENT SYSTEMS
Aquus CL-One is extremely effective in separating oil, water, and solids in drains and conveyor traps and sumps on automatic honing, turning and grinding machines when using water based lubricant and cooling liquids. The emulsions are broken allowing cleaned metal dust, shavings and dirt to precipitate to the bottom, the solution of Aquus CL-One and water retains the active cleaner in the middle layer, and oil and grease float to the top. The efficiency of oil/water separators in plant waste treatment systems are significantly increased while the amount of toxic waste requiring disposal after treatment is significantly reduced. The cleaning solution can be reused to treat more waste streams until biodegradation occurs and it no longer operates effectively.
FURTHER INFORMATION
Please visit our website https://www.envirotech-europe.com/aquus-cl-one for information about other uses and applications for Aquus CL-One.
Visit www.envirotech-europe.com/applications-and-case-studies for information about uses and applications for all EnviroTech Europe products.
We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance.
For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page:
Aquus CL-One Concentrated all-purpose cleaner
Aquus® CL-One concentrated all-purpose cleaner – Water based cleaning and protection of metal surfaces prior to powder coating or painting.
Aquus CL-One is an excellent all-purpose cleaning system for the cleaning and protection of mild steel and ferrous metal parts which need powder coating or painting immediately or when it is necessary to store unpainted for limited periods. Any cleaning system can be used – hand wiping, dip tanks, ultrasonics or pressure washing.
Uncleaned metal components or fabrications before cleaning are protected by process oils and grease on the metal guarding the surfaces from changes in humidity. Once removed using conventional water-based cleaners flash rusting can occur very quickly during drying.
The unique Aquus CL-One formulation however leaves an invisible barrier on the metal surfaces, after the cleaning process, providing extended corrosion protection during storage, fabrication, or assembly before finishing. The barrier film can be powder coated or painted over without additional rinsing and without affecting adhesion of the coatings.
General purpose cleaning
Aquus CL-One is also an excellent general-purpose concentrated surfactant system containing no solvents which exhibits a unique combination of characteristics that are not found in other commercially available cleaning processes biodegradable, non-flammable, non-toxic at used concentrations and, unlike almost all other surfactant systems, is both hydrophilic (water attracting) and oleophobic (oil-repelling).
Aquus CL-One offers exceptional emulsion-breaking capability in addition to its unusual combination of properties that makes it so attractive for a wide range of industrial applications. In addition to the general cleaner Aquus CL-One, other concentrated cleaners within the range are formulated to offer cleaning solutions for industry specific applications.
One cleaner for all applications
One cleaner for all applications reduces costs by removing the need for multiple cleaning products usually needed to deal with a wide range of soils or contaminants. Safe for the environment and users, containing no solvents is biodegradable within 30 days. Typical with only one product for all cleaning applications incorrect selection or dangerous uses can be avoided.
Please visit our website https://www.envirotech-europe.com/aquus-cl-one for information about other uses and applications.
We can provide you with a Material Safety Data Sheets, independent laboratory reports, product samples and technical assistance.
For more information or advice please telephone us on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page: