“An ounce of prevention is worth a pound of cure.”
Benjamin Franklin said that in 1736 and it is as true today as it was then.
One of the most important opportunities for savings today is the prevention of failures caused by corrosion. Corrosion leading to the repair of or the complete re-placement of failed parts or components, a pound of cure, which is preventable, equates to increased production costs and a decrease in the bottom line profits.
SuperCORR A is the ounce of prevention that will save your company money; man hour costs and parts in the re-pair or replacement of equipment that failed because of corrosion issues that are easily preventable. Whether it’s an electrical connection that failed because of corrosion which caused a cooling pump to shut down that caused a bearing to overheat and burn out that brought an entire production line to a halt or it’s the floor of an airliner that was so corroded that the aircraft was grounded for extensive repairs, corrosion is a serious and a very expensive problem. A problem that is preventable.
An ultra thin-film lubricant with corrosion preventative compounds that displaces water, SuperCORR A has been extensively tested on metals and electronics and has shown extremely good results in preventing corrosion.
The question to ask yourself is: What is the cost of NOT using SuperCORR A to prevent corrosion?
If you were able to say we are saving £100 a day by using SuperCORR A by not having a failure caused by corrosion would that be a good thing? How about saving a £1000 a day? A saving that would directly influence the bottom line.
You have essentially two choices:
1). Being proactive about corrosion and doing something simple and very cost effective to prevent it,
2). Do nothing and take your chances that the cause and the associated costs of the next lost production time are not directly related to a preventable corrosion problem.
Being proactive about corrosion and doing something that is cost effective and protects the bottom line is nothing but a positive. Remember the cost of lost productivity is directly related to lost profits.
CORR-EX corrosion control solutions have the answer to corrosion prevention for all industries and utilities.
We can provide you with a Material Safety Data Sheet, independent laboratory reports, product samples or technical assistance. For more information or advice please contact us by telephone on +44 (0) 20 8281 6370 or use our contact form.
All products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors in Europe and the Middle East.
Share this page: